Haier GWT900AB, Service Manual

12

MAINTENANCE SERVICE AND TROUBLE SHOOTING

Is the water pressure lower?

It is special phenomena for
washer with pump.

Wait for the normal water
pressure before use.

It is the water remained in the factory
inspection of performance.

Phenomenan                   The reason                        How to settle

Common phenomena

Phenomena                                                  Explanation

The program is setting the drain time. Some
 time is needed before it starts spinning.

The top lid is not closed.
 

Is the drain hose put up?

Is the jointer screw of  the
water  inlet  hose is loose 
or twisted awry?

Is there power failure?
Is the power plug loose?

Is the machine slanting?
Are the laundries slanting
 in spinning?

Fasten the jointer screw
properly.

If  do not  need continue
draining,  you  can raise
the entrance of drain hose
and let water flow back
inner tub. .

Close the top lid.

Put up  the drain hose. 
Open and close the top lid once.

Use it when the power is on.
Insert the power plug tightly.

Level the machine properly.
Re-order the laundries.

There may be some water flowing out of 
the drain hose in the first use of the machine.

Press  the  "Process " button  to 
select "Spin", but it doesn't work.

The water faucet leaks.

During draining, the washer 
continues draining when push
in programme selector knob.

The machine does not act.

There's abnormal sound 
inside the machine.

In washing,rinsing,spinning, 
the machine stops running. 

No water filling or
filling slowly