English
SECTION 4 - ELECTRICAL CONNECTIONS
• The electrical connections to the control cabinets must be carried out by specialized staff, following the supplied wiring diagrams.
• Make sure that the voltage and the frequency specified on the nameplate correspond to those of the power supply line.
• For the main supply of the regenerator is not allowed to use adapters, multiple sockets and/or cable extensions.
• The installer must foresee the installation of the cut-off switch and of everything that is necessary for the protection of the electri-
cal components, as close as possible to the unit.
• Connect the unit to an effective earth, using the appropriate screw fitted on the unit.
Before beginning whichever operation make sure that the voltage supply is cut off.
Carry out the connection with cables of a section which is adapted to the engaged power and in the respect of the local norms.
Their dimension must however allow to realize a voltage drop of less than 3% during the starting phase.
4.1 Installation and servicing of remote controllers
Installation, Use and Maintenance Manual - HACI-RP DX series
pag. 42
4.1.1 Remote control panel
Mode key in the main interface, return key in
other interface.
Fan key in the main interface, return key in the
other interface.
Shotcut key, press it to enter the schedule
function directly.
Invalid key in the main interface, shift direction
key in other interface.
Invalid key in the main interface, shift direction
and value adjustment key in other interface.
Menu key in the main interface, confirm key in
other interface..
ON/OFF key
4.1.2 Main Interface Display
Schedule
Error code function, the icon will display in the main interface when the
wired controller or the indoor unit linked to controller is malfunctioning.
Central
Lock
Summary of Contents for HACI-RP DX 100
Page 52: ...2020 06 ...
