SERVICE MANUAL
Model: HB21FSSAA, HB21FG*
15
Issue 2010-12
Rev.
Ref1012S008V0
b. Secondly, let the shaft of automatic door closer aim at the shaft of middle hinge when putting the fridge
door above the middle hinge.
c. Thirdly, must keep the fridge door and cabinet in vertical 90° degree when putting the fridge door above the
middle hinge, in order to ensure the door be installed in right position with the middle hinge.
Check the installation after finished operation:
Right Operation:
When install the fridge door, keep the door in 90°
angle with the cabinet. The door, the anti-friction
ring and middle hinge are fitted rightly.
Wrong Operation:
When install the fridge door, no keep the door in
90° angle with the cabinet. The door, the anti-friction
ring and middle hinge are not fitted rightly, there is
gap between them, that cause the door is not
installed in position wholly.
5.
After finishing door installation, check the following items:
a. Power on the refrigerator, it can be start.
b. Can open and close fridge door smoothly.
c. Check if the left fridge door and the right fridge door are not level.
If exist the phenomenon that the left fridge door and the right fridge door are not level, first check the install
status between the door and middle hinge according to above instruction 4(C). If the installation operation is OK,
the door, the anti-friction ring and middle hinge are not fitted rightly, but the two fridge door are still not level, can
level the doors by adding adjusting pad (there are three 1mm adjusting pad with the refrigerator.) .Operation
method:
