background image

 

 

 

                                                                         

Order NO

.

 Ref1403S005V0 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

                                                                 

2014(HAIER ELECTRICAL APPLIANCES COR. LTD)

 

                                                                              All right reserved. Unauthorized copying and distribution is a violation of law.

 

 

 

Refrigerator 

 SERVICE MANUAL

MODEL:  HC17SF10RB

HC27SF10RW

HC27SF10RB

Haier Group

 

This service information is designed for experienced repair technicians only and is not designed for use by the general public. It 

dose not contain warnings and cautions to advice non-technical individuals of potential dangers in attempting to service a product. 

Product powered by electricity should by serviced or repaired only by experienced professional technicians. Any attempt to service 

or repair the product or products dealt with in this service information by anyone else could result in serious injury or death. 

WARNING 

Summary of Contents for HC17SF10RB



















Reviews: