10
The electronic ignition, lights the surface burners when the control knobs are turned
at any valve rotation that admits sufficient gas flow to support a flame.
If any burner flame goes out due to a draft or other reason, the gas valve will shut off
the gas supply. To re-ignite the burner, turn the gas valve to the ignition setting and
push down the knob to ignite the burner.
NOTE: This is a safety feature.
To set:
Push and turn knob counterclockwise, all (4 or 5) spark plugs will generate a clicking
sound (spark), however only the burner with the control knob turned from HI _ LO
will produce a flame and reignite automatically if the flame goes out.
GAS BURNERS
The gas burners design of these cooktop models, allow a pleasing option for cooking
where size, power and simmering are a primary concern.
This gas burner is designed for a wide range of pan
sizes
. The use of this burner is very simple; just
push and turn the knob counterclockwise and
set to the desired position from HI to LO heat
level (see chart guide when setting heat level). Its
ignition device is automatic re-ignition.
ON
MIN
OFF
Summary of Contents for HCC2230AGS
Page 2: ......
