16
Power ignition and adjustment of a cooking zone
To turn ON a cooking zone its touch control must be switched ON (see section “HOW TO
TURN THE TOUCH CONTROL ON AND OFF”).
Starting
1
Press the key
to activate the cooking
zone to be lighted; then release the key.
The point of the selected zone on the bottom
right side of the display remains lighted
while the points of all other cooking zones
are turned OFF.
If the activated zone is hot, the display will
alternately
readout
and
.
2
Press the key
and keep it pressed
until the desired power level, ranging
between
and
is set.
As an alternative, press the central key
.
The choice starts from level
(maximum
level) down to
(minimum level)
The display shows the preset power level; the
point at the bottom right side remains lighted
for 10 seconds. Adjustment will remain possible
as long as the point is lighted.
Power adjustment of a heated cooking
zone
1
Press the key
to activate the cooking
zone to be adjusted, and then release the
key.
The point at the bottom right side will light
up to indicate the activation.
2
Press the key
or
and keep it pressed until the
desired power level is set.
The display will readout the newly preset
power level; the luminous point at the bottom
right side remains lighted for 10 seconds.
Adjustment will be possible as long as
this point is lighted.
Using your cooktop
or
or
Luminous
point
Luminous
point