Haier HDV40A1, Installation Instructions Manual

INSTALLATION INSTRUCTIONS

   Stacking installation

    Your dryer has been designed to be able to be stacked on the top of a Haier front load

    washing machine, ensure the washing machine is the same width as your dryer.

     Tools and parts required: 

■

  Drill and 2.9mm bit  

■

  Phillips head screwdriver

1  Remove 4 screws at two sides of bottom panel, then install the stacking bracket.

 4 Screws

Stacking bracket

2  Install your dryer with stacking bracket on the top of the front load washing machine. 

    Drill two holes on both sides of top panel of washing machine with 2.9mm diameter 

    drill. Detailed drill position as shown on the stacking bracket. Only use the screws 

    supplied in the stacking bracket. Fix the stacking bracket on the top panel of washing 

    machine.

■  The models of Haier front load washing machine that 

    can be stacked installation  are followed:

    HWF75AW1

    HWF80BW1     

    HWF85AW1

    HWM75-B12266

    HWM85-B14266

    HWM75-1279

    HWM85-1479

    HWM85-1482

    HWM70-1201

    HWM80-1401

    HW70-1203D

    HWM80-1403D

Dryer

Stacking bracket

Front load washing

machine

9

Stacking bracket includes:  

■

  2 x Stacking bracket