TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Fault code warning
Dryer has a fault.
Refer to page 17.
Noises.
Dryer is overloaded.
Remove some items from the dryer.
Dryer has a fault.
Continuous beeping or a musical series of
beeps with a message displayed on digital
display.
Refer to page 17.
Beeps signalling the end of a
drying cycle.
End of cycle beeps can be turned off.
Refer to page 17.
Vibration.
Dryer is not installed on a stable
surface.
Ensure the dryer is installed on a flat,
stable surface. Refer to page 7.
Dryer is overloaded.
Remove some items from the dryer.
Creasing.
Dryer is overloaded.
Remove some items from the dryer.
‘Temperature’ selected too
hot for load type.
Try selecting a lower ‘Temperature’.
‘Anti-crease’ option not
selected.
Select the ‘Anti-crease’ option to rotate the
load at the end of the drying cycle.
Refer to page 15.
Dye transfer.
White/light and coloured
items not separated before
drying.
Remember to separate white/light and
coloured items before placing them in the
dryer.
Wet items left sitting in the dryer
for long periods of time before
drying.
Do not leave wet items sitting in the dryer
for long periods of time before drying, if
they are prone to colour run. If you do
intend to leave them for long periods
before drying, then separate the load and
put those items that may cause colour run
aside.
Tangling.
Loads not separated during
loading.
Try separating out larger items from
smaller items.
Items loaded into the dryer
incorrectly.
Load items individually into the dryer.
Do not place folded items in the dryer.
Load size too large.
Try drying smaller load sizes. Some
cycles have a lower maximum load size.
Refer to pages 13 and 14.
Sheets and duvet covers
due to their size, are prone
to tangling.
Dry sheets and duvet/doona covers
separately from other laundry. Ensure
duvet/doona covers are buttoned or
fastened closed before drying.
19
