17
Washing dishes
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., and
the amount and condition of food residue, with the details contained in the programme overview. The
corresponding programme sequence, duration and consumption details are shown in the right half of the
overview. For example:
Use the “normal” programme for dishes and utensils that are not heavily soiled, and are typically a mix of
plates, glasses and cutlery.
Make savings
If only a small number of dishes have been loaded into the dishwasher, selecting a programme that
operates at the next lowest temperature will usually be sufficient.
Programme data
The stated programme data are based on standard operating conditions. The values can vary
considerably according to:
Amount of dishes.
Temperature of mains water supply.
Pressure of mains water supply.
Ambient temperature.
Fluctuations in mains voltage.
Machine-related factors (e.g. temperature, water volume).
Switching the dishwasher ON
Close the door after loading the appliance.
Set On-Off button "B" to On. The indicator light "A" comes on.
Rotate the dial to select the required programme. The
time-remaining indicator displays the time required for the
programme you have selected. After 3 seconds the appliance
emits a short warning signal, and starts the programme. The
indicator light "A" starts to blink.
Warning
When the dishwasher is on, if the programme to which the dial is pointing cannot
be carried out, you must rotate the dial to another programme and then back to the
programme you require.
POWER
3 in 1
DELAY
HEAVY
NORMAL
LIGHT
GLASSWARE
PRE-RINSE
RINSE
QUICK 30
1
2
3
4
5
6
7
B
A
D F
C
G
E
I
H
en
