49-60809
10
INSTALLATION REQUIREMENTS
ENGLISH
STEP 2 - DOOR REVERSING
(Optional)
The door hinges are factory installed on the right-hand side. If you want the
doors to open from the opposite direction, you can reverse the door swing.
TOOLS NEEDED
• 5/16” Hex-head Wrench
• 3 mm Hex Key
• Putty Knife
IMPORTANT:
• Before you begin, unplug the beverage center, or disconnect power.
• The door is heavy and fragile and the door front is glass. To avoid door
glass breakage, use both hands and grasp only the sides of the door to
remove.
1. Using two or more people, gently lay the beverage center on its back.
2. Using a 5/16” hex-head wrench, remove the three hexagonal screws
fastening the bottom hinge to the cabinet, and set aside.
3. Remove the bottom hinge and the two washers. Set the washers aside.
WARNING
Follow all steps when reversing the door swing. Failure
to follow these instructions, leaving off parts, or overtightening screws,
can lead to the door falling off and result in injury and property damage.
Bottom
Hinge
Screws
Summary of Contents for HEBF100BXS
Page 2: ...49 60809 2 ...
Page 21: ...21 49 60809 ENGLISH NOTES ...
Page 66: ...49 60809 66 NOTES ...
Page 67: ...67 49 60809 NOTES ...
