M101
er manual
第
17
页
1.7.5
Unsuccessful calls
The phenomena of unsuccessful calls may appear during the dialing, for example: the line is
busy, reject the call, the phone of other side is not within service area or the phone of other side is
power off, etc. the phone will prompt “Call failed”. At this time if you set auto redial (refer to
chapter 7.2.4), the phone will automatically redial for 10 times but all failed, or be canceled
initiatively.
1.8 Answer the call
When a new call comes, the phone will display the phone number or name of the new call,
and press
D
key and
U
key to silence. Moreover inform you by ring/ mute mode according to
your setting.
When the phone is in ring, and the indication of incoming call displays on the screen, press
Snd
key or
Answer
key to answer the call.
After talking is over, press
Pwr
key to hang up the phone.
During the talking, the phone will prompt new call by short “toot” sound. At this time you
can press
Snd
key or
Answer
key to answer new call; moreover the previous call will become
hold status. If do not want to answer, you can press
Pwr
key or
Reject
key to reject the call.
1.9 During the talking
During the talking, activate
Options
key, which may complete the following functions: Hold,
Mute, New call, New SMS and Contacts.
Select
Hold
to hold the current talk (related with SIM card), at this time both parties can not
hear the voice, meanwhile the menu changes to
Active
, select this menu to return to normal
talking.
Select
Mute
to pause voice of current talking, at this time you can hear the voice of other side,
but it can not hear your voice, which facilitates you to talk with other local person to during the
talking. The menu changes to
Unmute
, select this menu to return to normal talking.
Select
New call
to make the second phone call, or press number keys to make a new call
during the talking, then press
Snd
key to dial out phone.
Select
New SMS
to enter new short message screen and complete the corresponding
operation, press
Back
key to exit short message screen and back to talking status.
Select
Contacts
to enter phone book screen, and implement the corresponding operation,
which facilitates to search a phone number during the dialing.
When dialing the extension, after hearing the prompt voice of the other side, directly dial the
extension number, and only extension number displays on the screen. When extension dialing
completed, press
Delete
and
Back
key to display the number of switchboard.
Press
Handfree
to enable handfree function,
Handfree
changes
Receiver
, press
Receiver
to
resume normal.
1.9.1
Adjust volume
Press
U
key and
D
key to decrease or increase the volume during the communication. Refer
to 1.4 chapter illustration for key positions.
