16
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Oil leak.
Too much oil in the oil
receptacle.
Remove waste oil in the oil receptacle.
Oil cover has not been
cleaned.
Clean the oil cover in accordance with
the instructions.
Main housing hasn't been
cleaned.
Wipe the main housing every day
after use in accordance with the
instructions.
Oil Cover is
difficult to remove.
Cover and cover recess have
not been cleaned.
Clean the oil cover and cover recess
weekly in accordance with the
instructions.
Note: if you are unable to fix the problem by following the above prompts, or one of the
situations below occurs, please unplug the range hood straight away and contact our
after-sales service centre.
1
The range hood runs unevenly when turned on;
2
The range hood makes an unusual noise during operation;
3
Strange odours, heat or smoke are discovered, or other unusual circumstances not
mentioned above occur.
The following phenomenon is not a malfunction
PHENOMENON
CAUSE
The product makes a clicking
noise after the power is switched
off for a few seconds.
Air pressure causes the two blades of the check valve
to open during operation. After the power supply is
switched off, the fan gradually stops rotating and the
blades fall back by themselves, emitting a clicking
noise.
