INSTALLATION INSTRUCTIONS
7
5.Connect the universal ducting hose
●Connect one end of ducting hose with the check valve and seal it.
●Connect the other end of the hose to a shared flue or external wall hole as
shown in Fig8.
●The length of the universal ducting hose should not exceed 3 metres to
prevent impact on venting performance. The number of bends should be
minimised. Flexible ducting should be stretched tight and trimmed to suit the
installation.
160
Fig.8
6.Extend the inner decorative cover (if inner decorative cover extension
is to be used)
Pull the inner decorative cover up and hook it onto the decorative cover holder.
7. Fit the oil collector
● Slide the oil collector into the slot.
● Make sure the oil collector is pushed all the way in.
8.Remove packaging
Remove all protective wrappings.
