Operation/Maintenance/Specification/Troubleshooting
EN-21
Haier LED HDTV
1.
Play Time
4.
Shuffle On or Off
2.
File Name
5.
Audio Only
3.
Repeat
6.
Information
Press
D
MENU
button to display the option list.
1.
Play/Pause
4.
Picture Mode
2.
Repeat
5.
Screen Mode
3.
Show Info
Press the button on the remote control to select the
E
adjusted item, press
ENTER
button to confirm.
PLAY/PAUSE
REV
STOP
PREV
REPEAT
NEXT
1
2
3
4
5
6
7
1. Play or pause
2
Stop
3. Repeat
4. Fast reverse
5. Fast forward
6. Play previous music
7. Play next music
Press
F
EXIT
button to return to the previous menu.
Press
USB
button to exit the USB mode.
Note
Do not remove USB device from the TV until
R
you have exited the USB mode otherwise you
may damage the USB device.
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen
A
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
Make sure the excess water is off the screen, and
B
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Specification
Product Specification
Resolution(Dot)
19''
22''
1366
s
768
1920 x 1080
Power requirement
120V~ , 60Hz
Stand-by
Consumption
less than 1W
Color system
NTSC, ATSC, Clear QAM
External Antenna
Impedance
75 ohm
Color
16,770,000 (256 steps of
each R, G and B)
