7
English
NOTE:
As the door gets pressed in during shipping, after reversing the door, the
gasket may have to be reset. This is done to prevent the cool refrigerated
air from escaping. If there is a gap between the door gasket and the
cabinet, set the gasket by gently pulling it out to seal the gap.
Door alignment
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a phillips head screwdriver.
3. Adjust the door or put a spacer in between and then tighten the screws.
4. Replace the top hinge cover.
General features
adjustable temperature dial:
Your refrigerator will automatically maintain the temperature level you select.
The temperature control dial has 7 settings plus "0". 1 is the warmest. 7 is the
coldest. At first, set the dial to 4 and allow 24 hours to pass before adjusting the
temperature to your needs.
Note:
If the refrigerator has been placed in a horizontal or tilted position for any
period of time wait 24 hours before plugging the unit in.
freezer Compartment / use of the ice Cube Trays
This compartment is designed for making ice cubes and for short-term food
storage (a few days at most).
WaRNiNG:
This compartment is not cold enough to freeze foods safely for
more than 5 days.
• If ice cube tray freezes to the bottom of the compartment, pour a little warm
water around it to loosen it. Do not use boiling water, which can damage
plastic parts, or sharp metal objects such as a knife or screwdriver, which can
damage the cooling system tubing. Wash the ice cube tray in lukewarm water
only. Do not wash in the dishwasher.
Refrigerator interior shelves
To remove or replace a full-width slide-out shelf:
(see fig. # 1)
1. Gently tilt the shelf up and slide
forward until the shelf has been
completely removed.
2. To replace the shelf, gently slide the
shelf back.
REfRiGERaTOR fEaTuREs aND usE
fig. # 1
