Use handle to open and
close the door. Don't allow
children to play with
the door.
Do not place fridge in
wet or humid area where
water or rain drops can
splash on the fridge.
Disassembling, repairing or
any alterations to the fridge
should be done by
authorized repair
personnel only.
Do not put bottled liquid in the
freezer section, it may freeze the
contents and cause frost-cracking.
Close bottle caps tightly if storing
horizontally, to avoid leakage that
may cause ice formation/sweating
issues.
2. SAFETY SIGN & PRECAUTIONS
When you disconnect the power
cord for cleaning or
repairing purpose, reconnect
it after at least 5 minutes to avoid
compressor damage due to quick
transition between ON/OFF states.
Do not touch the compressor while
appliances is in operation.
You may get burn.
3. PRODUCT INSTALLATION GUIDELINES
1) Unpack your refrigerator in the presence of dealer or company personnel and check for
transit damage before installing the refrigerator. In case of damage, inform your dealer
immediately and don't install the unit.
2) If there is no transit damage, remove all the packing material and adhesive tapes from
exterior and interior of the refrigerator.
3) Read user guide manual carefully.
4) Choose appropriate location for your refrigerator that must be away from direct heat
sources and not in environment having temperature <10°C, maintain at least 20cm
distance from all the sides for well ventilation.
5) Level the refrigerator so that it rests firm on the floor, to do so, there are two adjustable
legs one at each front corner. Turn to the left to raise a corner and to the right to lower the
corner.
If you want refrigerator door to close when not held open, adjust front legs in such a way
that front refrigerator side is raised. If you want refrigerator door to remain motionless
when held open, adjust front legs in such a way that all four corners are leveled with each
other.
6) Gently wipe off interior and exterior of the refrigerator with soft cloth and mild detergent,
leave the doors open for a while to let it dry completely and to get rid of plastic smell,
however this smell will go away when refrigerator is cooled sufficiently.
7) Refrigerator could have been tilted during transport/handling, keep it standing for minimum
2 hours before switching it ON to ensure compressor gas stabilization.
8) Tear off transparent film cover from the refrigerator’s cabinet body and don't use any
external cover to protect the exterior of refrigerator, this is to ensure proper heat
dissipation for efficient cooling.
9) Switch ON refrigerator and let it cool sufficiently for 3-4 hours before loading food.
Install the fridge where the temperature is 10°C to 43°C. If your refrigerator is
installed in too low or high temperature, the internal cooling system may not work
properly.
4
Summary of Contents for HRD-2423CIS-E
Page 14: ...NOTE ...
Page 15: ...NOTE ...