10
Installation instruction and ventilation requirements
Location
It is advisable that your appliance is only installed in
a location where the ambient temperature of the
room, corresponds with the climate classification
that is stated on the rating plate of your appliance.
Your appliance may not function correctly if the
ambient temperature falls outside of the following
ranges.
Climate classification Appropriate ambient temperature
SN
+10 to +32 degrees centigrade
N
+16 to +32 degrees centigrade
Your appliance should not be located in direct
sunlight or exposed to continuous heat or extremes
of temperature (e.g. next to a radiator or boiler).
Before installation
After delivery, wait for eight hours before
connecting the appliance to your mains supply.
This will allow any refrigerant gasses that may
have been disturbed during the transportation
process to settle.
The outside of the appliance and the removable
accessories contained within it, should be
cleaned with a solution of liquid detergent and
water.
The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
Ventilation requirements
The appliance must have adequate ventilation to ensure correct operation.
The diagram shows the ventilation requirements when installed:
The clearance space should be no less than 200 cm
2
SERVICE MANUAL
Model:
HRF-265F
Issue
20090827
Rev.
Ref0908S006V0