SERVICE MANUAL
Model: HRF328\368
15
Issue 2015-7-18
Rev.
Ref 1507S002V1
Child Lock
: When the screen is unlocked, press the key
B
to select the Child Lock, and then press the
key
C
, the function will be on.
Unlock: Touch any key on the screen, the display screen and the child lock button will be lightened;
press the key
B
, the child lock icon will flicker; press the key
C
, the screen will be unlocked.
When the screen is locked, the key
A
is not effective; function selection is not available when
pressing the key
B
.
■
Alarm signals
Temperature Alarm
:
If temperature inside refrigerator is over 15°C than the setting temperature, an
intermittent buzzer and the flashing alarm led
c
will indicate the temperature alarm. Display will show
you code “
HH
”.
If temperature inside refrigerator is lower than -2°C, an intermittent buzzer and the
flashing alarm led
c
will indicate the temperature alarm. Display will show you code “
LL
”.
After the screen is unlocked, press the key
B
to choose the “Alarm” function, then press the key
C
, it’s possible to stop acoustic sign, but alarm condition will continue till refrigerator will reach the
suitful temperature.
Door Alarm
:
If the door is left open for 120 seconds, the anomalous condition will be notified by
intermittent buzzer. The alarm condition will stop by closing the door or by pressing key
B
to select
Alarm function and pressing the key
C
, but in this second case alarm condition will restart after 120
seconds if door is still open. If the door is open for consecutive 7 minutes, the inner light will be off and
there will be continuous alarm.
5-3 Error code display and sensor positions
5-3-1 Error code display and description
Malfunction
Description
Display Display
position
Malfunction analysis or Sensor location
Malfunction of the
refrigerator
temperature sensor
F3
Display panel
The refrigerator temperature sensor is
located in the right-side of the storage
space
Malfunction of the
defrosting
temperature sensor
F1
Display panel
The defrosting temperature sensor is
located on the evaporator, foamed in the
refrigerator box
Malfunction of
communication
between the display
panel and the power
board
E0
Display panel
/
Preference: E0>F3>F1>HH>LL>temperature display
5-3-2 Sensor location
the refrigerator temperature sensor
5-3-3.Test step of error code
Show of error code:
In the screen lock state, hold down the key
C
, press key
A
four times, the display
panel will show error code(
F3\F1
),after 20 seconds,the display panel will show the former temperature
again. If the display panel shows “00” (harf of 0), it indicated there is no malfunction.
