Safety
Before switching on the appliance for the first time do…
▶
make sure there is no transport damage.
▶
make sure all packaging is removed and is kept out of children´s
reach.
▶
wait at least two hours after installing appliance before using to
ensure refrigerant circuit is fully effcient.
▶
handle the appliance always with at least two persons because it
is heavy.
▶
install the appliance in a well-ventilated place. Ensure a space of at
least 5cm above and 5cm around the appliance. Install and level
the appliance in an area suitable for its size and use.
▶
keep ventilation openings in the appliance or in the in-built struc-
ture clear of obstruction.
▶
make sure that the electrical information on the rating plate
agrees with the power supply. If it does not, contact an electrician.
▶
consider that the appliance is operated by a 220~240 VAC/50 Hz
power supply. Abnormal voltage fluctuation may cause the appli
-
ance to fail to start or not to operate correctly and damage the
temperature control or compressor, originating abnormal noise
too. To eliminate abnormal fluctuation it is suggested to use an
automatic regulator.
▶
use a separate earthed socket for the power supply which is easily ac-
cessible. The appliance must be earthed. Make sure the plug is eas-
ily accessible.
▶
ensure that the power cable is not trapped by the refrigerator. Do
not step on the power cable.
WARNING!
Make sure not to damage the electric cable and the plug. If dam-
aged it must only be re-placed by either the manufacturer or the
authorised service agent.
6
