background image

13

D. Using the [P+] or [P-] key to select 
     the AVL,  AVL is auto volume level.
     Using the [V+] or [V-] key, AVL will 
     be turned OFF and ON.
E. Using the [P+] or [P-] key to select 
    the CALENDAR.
    Using the [V+] or [V-] key, 
    CALENDAR will appear.
    After CALENDAR is appeared on the
    screen:
    Using the [P+] or [P-] key to change
    the month.
    Using the [V+] or [V-] key to change
    the year.
F. Using the [P+] or [P-] key to select the GAME1 or GAME2.
    Using the [V+] or [V-] key, GAME will appear.
    In game 1 mode, input digit by digit key direction. Until same
    number is 4, same position 4.
    Push [MENU] key to start game again.
    Push [?] key to exit game.
    In game 2 mode, the box will be moved to specific dot.
    Push [P+] or [P-] key to move the box for up or down.
    Push [V+] or [V-] key to move the box for right or left.
    Push [?]  key to exit game.

14

Figure A

Figure B

Antenna cable
with a plug

Figure C

Figure D

 Antenna feeder

 Antenna adapter

 75-300

Ω

Coaxial cable(75

Ω

)       twin-lead cable(300

Ω

)

Antenna   connection
Connect an antenna to the antenna socket on
the TV set, we recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75

Ω

),insert the 

   antenna plug (see figure C) into 75

Ω

socket

   (see figure A).
2.If you use a twin-lead cable(300

Ω

),please

   shape the cable as figure D, and connect the 
   leads to antenna adapter and then insert the
   antenna adapter into the 75

Ω

socket (see

   figure B).

Power source wire connection
Insert the power plug into AC outlet.
Install and replace batteries of the 
remote control unit:
1.Place the remote control unit with the face
   down, then  open the battery cover of the 
   unit.
2.Place the two"AA"size batteries, matching 
   the + and - signs on each battery to the +
   and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a 
     long period or the electricity of the 
     batteries is used up, remove the batteries
     to prevent batteries acid from leaking 
     into the battery compartment.
(3)Replace the two old batteries at the 
     same time.
(4)Don't use charge battery (Ni-cd )and 
     don't mix battery type.
(5)Don't throw your batteries into a fire. 
     Dispose of your batteries in a required 
     place.

PREPARING FOR OPERATIONS 

Antenna

2004   1
Su   Mo   Tu   We   Th   Fr   Sa

                                                 1

2      3       

4       5      6      7      8

9      10     

11     12    13    14    15 16    17     

18     19    20     21    22 23    24     
25     26    27     28     29  30    31 

- - - - - - - - - - - - - - -

- - - - - - - - - - - - - - -

- - - - - - - - - - - - - - -

- - - - - - - - - - - - - - -

MENU OPERATION

S-VIDEO

S-VIDEO

Y

Y

C

C bb

C

C rr

OUT

OUT

IN

IN

VIDEO

VIDEO

AUDIO

AUDIO

L

L

R

R

IN

IN

Summary of Contents for HT-3499










Reviews: