10- Installation
GB
10.6 Fine tuning of the doors
If the doors are not in one level, this mismatch can be
remedied by following:
10.6.1 Using adjustable foot
Rotate the adjustable foot according to the direction of
arrow to turn up or down the foot (Fig. 10.6-1).
10.6-1
10.6.2 Using spacers
▶
Open the upper door and lift it.
▶
Carefully clip the spacer (enclosed in the accessory
bag) in the white plastic ring of the middle hinge by
hand or using tools like pliers (Fig. 10.6-2). Do not
scratch or bruise the door.
10.6-2
30
3. The stability can be checked by alternately bump-
ing on the diagonals (Fig. 10.5-3.). The slightly
swaying should be the same in both directions.
Otherwise the frame can warp; possible leaking
door seals are the result. A low tendency to the
rear facilitates the closing of the door.
3.
10.5
Notice: Fine tuning
In the future use of refrigerator, doors uneven phenomenon may occur to the weight of
stored food. Then please adjust according to the above methods.
