9
•
Display
When the door of the freezer is closed, without any operation on display, after 30 seconds, the display
will be auto-off. It will be on after pressing the temperature set button or opening the door.
•
DoorAlarm
If the door is left open for 1 minute, then it will alarm. The buzzer will make three beeps at the interval
of 0.5 seconds. If the door is still open, every 30 seconds, the buzzer will make three beeps at the
interval of 0.5 seconds, until the door is closed or the door is open for 7 Minutes,then the buzzer will
stop; the light in cabinet will be off.
•
Over Temperature Alarm
The freezer is set the function of over temperature function. If the freezer is normally use, the icon of
the current temperature shit in a area on the display flashes, accompanied by a buzzer sound, please
press the temperature set button A, then the alarm sound disappear, but the icon will still flash,
indicating the temperature in cabinet is too high. The user should check the door is closed strictly or
not, and check if the user put too much warmer food. After a short time, the icon will stop flashing; If the
icon cannot stop flashing, and after manual cancel but alarm sounds again, please contact our after
sale department.
•
Fault Display
The freezer has the fault function. When the freezer breaks down, a area will flash different icon
according to different faults, the Icon flash frequency is 0.25 second on, 0.25 second off, but the freezer
still freeze, Please contact
础
er sale to repair as soon as possible to realize the optimum control of the
freezer.
•
Power c
ut memory function
The freezer has the power cut memo
叩
function. Before power cut, the working state will be memorized,
after reene
咱
izing, the freezer can still work according to the temperature set and function before power
cut.
English
FUNCTIONS
