Energy saving tips
▶
Make sure the appliance is properly ventilated (see INSTALLATION).
▶
Do not install the appliance in direct sunlight or in the near of heat sources (e.g.
stoves, heaters).
▶
Avoid unnecessarily low temperature in the appliance. The energy consumption in-
creases the lower the temperature in the appliance is set.
▶
Allow warm food to cool down before placing it in the appliance.
▶
Open the appliance door as little and as briefly as possible.
▶
Make sure the door always closes correctly and unimpaired by food position. Keep
door seals clean.
▶
Defreeze frozen food in a fridge.
▶
Clean the rear of the appliance regularly. Dust increases energy consumption.
7.1 Removable door racks
The door rack can be removed for cleaning:
Place hands on each side of the rack, lift it upwards (1)
and pull it out (2) (Fig. 7.3).
In order to insert the door rack, the above steps are
carried out in reverse order.
7.2 Glass shelves
1.
To take out a shelf, remove it first by uplifting its hind
edge (1) and pulling it out (2) (Fig. 7.2).
2. To reinstall it, put it on the lugs on both sides and
push it to the most rearward position until the rear
of the shelf is fixed inside the slots in the sides
1
2
1
7.1
7.2
6-Energy saving tips
7-Equipment
17
EN
