1 - Safety
EN
Ensure that the power cable is not trapped by the freezer. Do not step
on the power cable.
▶
4
Before switching on the appliance for the first time, read the following safety
hints!
WARNING!
Before first use
▶
Make sure there is no transport damage.
▶
Remove all packaging and keep out of children´s reach.
▶
Wait at least six hours before installing the appliance in order to ens-
ure the refrigerant circuit is fully efcient.
▶
Handle the appliance always with at least two persons because it is
heavy.
Do not cover air vent openings.
▶
Installation
The appliance should be placed in a well-ventilated place. Ensure a
space of at least 10 cm above and around the appliance.
▶
WARNING
: Keep ventilation openings, in the appliance or in the in-
built structure, clear of obstruction.
▶
Never place the appliance in a damp area or location where it mi-
ght be splashed with water. Clean and dry water splashes and stains
with a soft clean cloth.
▶
Do not install the appliance in direct sunlight or in the near of heat sou-
-rces (e.g. stoves, heaters).
▶
Install and level the appliance in an area suitable for its size and use.
▶
Make sure that the electrical information on the rating plate agr-
ees with the power supply. If it does not, contact an electrician.
▶
The appliance is operated by a 220-240 VAC/50 Hz power supply.
Abnormal voltage fuctuation may cause the appliance to fail to start,
or damage to the temperature control or compressor, or there may be
an abnormal noise when operating. In such case, an automatic regular
or shall be mounted.
▶
Do not use multi-plug adapters and extension cables.
▶
WARNING
: Do not locate multiple portable socket outlets or por-
table power supplies at the rear of the appliance.
▶
WARNING
:When positioning the appliance, ensure the supply cord
is not trapped or damaged.
▶
Do not step on the power cable.
▶
▶
Use a separate earthed socket for the power supply which is easy acc-
essible. The appliance must be earthed.
