11
Installation and Accessory Parts
Electrical Requirement
l
Make sure there is a suitable power Outlet(115V)with proper grounding to
power the wine cooler.
l
Avoid the use of three plug adapters or cutting off the third grounding in order
to accommodate a two plug outlet ,This is a dangerous practice since it
provides no effective grounding for the wine cooler and may result in shock
hazard.
Install Limitations
l
Do not install your wine cooler in any location not properly insulated or heated
e.g. garage etc, Your wine cooler was not designed to operate in temperature
settings below 13
℃
Centigrade.
l
Select a suitable location for the wine cooler on a hard even surface away from
direct sunlight or heat source e.g. radiators, baseboard heaters, cooking
appliances etc, Any floor unevenness should be corrected with the leveling legs
located on the front and rear bottom corners of the wine cooler.
●
Your wine cooler is designed for free-standing installation only, It is not
designed for built-in application.
PDF created with pdfFactory trial version
www.pdffactory.com
