EN
10-Installation
29
10.8 Electrical Connection
Before each connection check if:
▶
power supply, socket and fusing are appropriate to
the rating plate.
▶
the power socket is earthed and no multi-plug or
extension are used.
▶
the power plug and socket are strictly according.
▶
Only UK:
The UK plug meets BS1363A standard.
Put the plug into the socket (Fig. 10-13).
WARNING!
▶
Ensure always that all connections (power supply, drain and fresh water hose) are firm,
dry and leack free!
▶
Take care these parts are never to be crushed, kinked, or twisted
▶
If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard. .
10-13
10.7 Fresh Water Connection
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled
end to the appliance (Fig. 10-11). Tighten the
screw joint by hand.
2. The other end connect to a water tap with a
3/4“ thread (Fig. 10-12).
10-12
10-11
Summary of Contents for HW100-B14876
Page 1: ...EN User manual Washing machine HW80 B14876 HW100 B14876 ...
Page 33: ...EN 12 Customer service 33 ...
Page 34: ...34 GB ...
Page 35: ...35 GB ...
