9-Installation
9.8 Electrical Connection
Before each connection check if:
power supply, socket and fusing are appropriate to
the rating plate.
the power socket is earthed and no multi-plug or
extension is used.
the power plug and socket are strictly according.
Put the plug into the socket (Fig. 9-8).
9-8
WARNING!
If the supply cord is damaged, it must be replaced by the service agent (see war-
Note: Hygiene
After each installation or long periods of disuse, before first use and for regular main-
tenance run programme Drum Clean with no load and small amount of detergent in
washing agent compartment (2) or with special machine cleaner to remove possibly
corruptive residues.
9.7 Fresh Water Connection
9-7.2
9-7.1
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled end
to the appliance (Fig. 9-7.1). Tighten the screw
joint by hand.
2. The other end connect to a water tap with a 3/4’’
thread (Fig. 9-7.2).
ranty card) in order to avoid a hazard.
27
Always ensure all the power supply, drain and fresh water hose are firmly conne-
cted, dry and leak free.
Ensure these parts are not crushed, kinked or twisted.
Summary of Contents for HW100-BP14959S6
