10-Installation
GB
26
Following connections are possible:
●
10.5.1 Drain hose to sink
edge of a sink with adequate size (Fig. 10-6).
●
-
ping.
10.5.2 Drain hose to waste water connection
●
The internal diameter of the stand pipe with
vent-hole must be minimum 40 mm.
Put the drain hose for approx. 80 mm in the
wastewater pipe.
(Fig. 10-7).
10-6
10-7
10.5 Drain Water Connection
Fix the water drain hose properly to the piping. The hose has to reach at one point a height
WARNING!
Only connect to cold water supply.
Before connection, check whether the water is clean and clear.
10.4 Aligning the appliance
Adjust all feet (Fig. 10-5) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten locknut (1) against the housing.
10-5
Summary of Contents for HW90-B14636
