9
3.5 Function buttons
ptions
o
l
a
n
o
it
i
d
d
a
e
l
b
a
n
e
)
6
-
3
.
g
i
F
(
s
n
o
t
t
u
b
n
o
it
c
n
u
f
e
h
T
ogramme,
in the selected programme before programme starts.
The related indicators are displayed.
all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
By touching the buttons, when it is in dull light, the function
is unselected; when it is in bright light, the function is
selected.
3.5.1-Function button “ Auto Dose“
Note: Factory settings
there is no special requirement default settings are recommended.
The recommendation on the type of detergents is suitable for the various washing temperatures,
please refer to the manual of detergent (see P11).
3.5.1
3.5.2
3.5.6
3.5.5 3.5.4
3.5.3
3.5.7
Note: Liquid dete
r
gent
If using liquid detergent, it is not recommended to adding more than 750ml.
3-6
NE AU
Touch this button (Fig. 3-7) gently to select the auto dose function for
liquid detergent, panel display . If the liquid detergent is not enough to
complete the cycle,
will flash every second.
Auto Dose
3-7
To set up level of Detergent:
To set up level of detergent:
3.5.2 Function button “+ Garment”
3.5.3 Function button “Soak“
Touch this button (Fig. 3-9) to add deep cleaning soak for
your mixed daily
loads in a normal wash action.
（
Fig.3-8
）
can be used to interrupt the cycle to add or remove
a garment at any time during the wash part of the cycle (provided the wash
temperature selected is lower than 60°C). Water in the washer will be drained
to a level where the door can be opened, if necessary.
+ Garment
Soak
3-8
3-9
The Auto Dose function dispenses the right amount of detergent for the clothes
according to the weigh and load type. The default setting is "D-3", which is the average
amount of detergent needed to launder a medium soiled load. There are 3 additional
this enables a personalized experience according to the laundry needs. For lightly soiled
clothes, use level "D-1" or level "D-2" and for heavily soiled clothes we recommend setting
the washer to level "D-4". Similarly, for sensitive skin, we recommend using the lower
setting "D-1", to minimize possible residual detergent in the clothes.
levels that allow to change the way the washer calculates the volume of liquid detergent;
To change the Auto Dose setting: Press the "Auto Dose" button for 3s to enter the
program setting mode. The program indicator light will turn ON and the default position
"D-3" will be displayed. Rotate the knob to switch between levels and select the desired
setting. Press the "Auto Dose" button again to save the selection and exit the mode.
