background image

1Preparation before washing

Preparation before washing
1.Connect the water inlet hose. Open the water
 faucet.
2.Confirm that the washing machine is earthed
 reliably.  Then  insert  the  power plug  into the
 receptacle. The earth terminal shall not  link to
 gas pipeline and faucet water pipeline.
3.Put the drain hose up to  suitable position.

Confirm  if  there has special  requirement for the laundries.
The quantity of the laundries shall not exceed the rated  value. The big laundries like jeans
shall be  put  in loosely.

Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, 
and other hard objects to avoid scratching the washer interior. Remove non-washable
trim and ornaments
Empty pockets and turn them inside out.
Turn down cuffs, brush away lint and dirt.
Tie strings and sashes so they will not tangle.
Mend tears, loose herms, and seams.
Treat spots and stains.
Stained or wet garments should be washed promptly for best results.

Separate heavily soiled items from lightly soiled ones, even if they would normally be 
washed together.
Separate lint givers(towels, chenille) from lint takers(corduroy, synthetics, permanent
 press). When possible, turn lint givers inside out.
Separate dark colors from light colors, colorfast items from non-colorfast items.
Sort by fabric and construction(sturdy cottons, knits, delicate items).

Note: "H" is the height of
the hanged drain hose.

Pay attention to followings before washing the laundries

Summary of Contents for HWM100-198
















Reviews: