Put in the laundries
The capacity of washing and spinning of he machine refer to the
largest weight of the standard laundries under dry condition that can
be washed or spinned in one time. One time washing quantity shall
be lower than the rated capacity.
The thickness, size, type of the cloth will influence the actual washing
capacity. It is suitable for one time washing to put in reasonable amount
of laundries and the laundries can be turned round in washing.
Do not select the high water level for laundries less than 1.0kg ,so as
to avoid splashing of water.
How to use the whitener
Fill water to desired level .Dilute the
whitener with container. Pour it
slowly into the liquid whitener inlet.
Avoid using whitener on laundries
with colour or pattern as they are
prone to lose color .
The whitener shall not touch the
laundries directly.
Refer to the user's manual for the
usage and quantity of the whitener.
For powder whitener, please
dissolve it before use.
Access for detergent
Detergent box
(lint filter)
Usage of the detergent
How to use the
washing powder
How to use the softener
It is suggested to put the
detergent into the washing
power box when the fuzzy
program is selected.
Directly dissolved in the
machine (not applicable
for fuzzy program)
1.Fill small quantity of water
2.Add the powder.Run for 30 seconds to dissolve
it completely.
3.Put in the laundries .Select suitable water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30°C and a container.
2.Add the powder while stirring to fully dissolve it .
In selecting quick program ,it is suggested to adopt
liquid detergent instead of washing powder to
guarantee the washing effect.
Put in the proper quantities detergent according to
the water level and the laundries quantities.
It is not suggested to use high sudsing detergent.
The dosage of detergent may be different because
of the different kinds of detergent .Please refer the
usage of detergent .
The usage and dose of the softener as per the specifi cations
of softener.
Turn the inner tub,you will find a softener inlet as the figure 1,
open the cover,put the softener into the inlet as the figure 2.
Before washing,close the cover and the softener will drop into
the inner tub during the last time rinsing.
After the softener is put in,please don’t place for a long time
otherwise softener may solidify and cause flowing not smooth.
Please pay attention to clean because the softner is easy to curdle
Please dilute the softner when the softner’s concentration is high.
When the rinsing time is not twice ,Please don’t use softner to avoid
influence effect.
Figure 1
Figure 2
Open
Close
Access for softener
Liquid whitener inlet
Control panel
