Haier HWM60-10 User Manual Download

Page: 18 / 20

If there's breakdown, please pull off the power plug before checking

Phenomena

The reason

How to settle

The top lid is not closed

Is the drain hose put down?

Is the drain hose blocked by
foreign material?

Are the laundries put slantingly?

Is the machine slanting?

The water tap is not open

The water inlet valve is blocked

The water pressure is too low
and the current is too small

Is there power failure?

Is the power plug loose?

The machine does
not act

Close the top lid

Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.

Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.

Open the water tap. Push the
"Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.

Use it when the power is on.

Insert the power plug tightly.

Trouble shooting Answer to question

Does the water level arrive at the
set water level?

Affusion to the set water level.

Is the power plug loose?

Insert the power plug tightly.

Is the top lid closed?

Close the top lid

Are the laundries put orderly?

Put the laundries orderly.

Not spin

Not wash

Buzzing upon reservation starts,
Nixie tube indicates "E0"

Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays

"E3",

buzzing

No or slow water filling (not
reaching the level in 15 min),
nixie tube indicates

"E4",

buzzing

No or slow drain, nixie tube

indicates

"E1"

, buzzing.

The top cover leaves open

Close the top lid

Running pauses during spin,
nixie tube indicates

"E2"

buzzing

No water filling

Is the power plug loose?
If the water faucet is turned on?
If Power On/Off and
Start/Pause are pressed?

Insert the plug firmly
Turn on the water faucet
Press Power On/Off and
Start/Pause

There's abnormal sound
inside the machine.

Is there metal material inside
the washing machine?
Are the laundries slanting in
spinning?

Is the machine slanting?

Level the machine properly.

Fasten the buttons and zipper

Reorder the laundries. Close the
top lid.

The machine does not act.
(the indicators are off.)

Is there power failure?

Is the power plug loose?

Use it when the power is on.

Insert the power plug tightly.

Summary of Contents for HWM60-10





















Search results

Summary of Contents for HWM60-10

Reviews:

Related manuals for HWM60-10

Brands by name

Popular brands

Haier HWM60-10, User Manual

Search results

Summary of Contents for HWM60-10

Reviews:

Related manuals for HWM60-10

Brands by name

Popular brands