background image

2 Put in the laundries

The  capacity  of  washing  and  spinning  of he  machine
refer  to  the  largest weight of the  standard  laundries under
dry condition that  can  be washed or spinned in one time. 
One  time  washing  quantity  shall  be lower than the rated 
capacity.
The  thickness,  size,  type  of  the  cloth will influence  the
 actual washing  capacity. It  is suitable   for  one   time 
 washing   to  put  in reasonable  amount  of   laundries  and 
 the laundries can be turned round in washing.

How to use the washing powder

3

Usage of the detergent

Inlet for concentrated washing 
powder and detergent

Put the washing powder and softener into the detergent
box directly as indicated in the left figure.
After that, please close the detergent box. Refer to the 
following table for the usage of the detergent: The 
standard dosage of the detergent and the water
quantity

Access for detergent

Access for softerner

Detergent box

Directly dissolved in the machine (not applicable for fuzzy
program and reserve wash)
1.Fill small quantity of water.
2.Add the powder. Run for 30 seconds to dissolve it completely.
3.Put in the laundry. Select suitable water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 and a container.
2.Add the powder while stirring to fully dissolve it. In selecting
The super quick program, it is suggested to adopt liquid
detergent instead of washing powder to guarantee the
washing effect.
Put in the proper quantities detergent according to the water
 level and the laundries quantities.
It is suggested not to use high sudsing detergent.
Washing powder with poor quality or long time storage
maybe caked. Please pay attention to cleaning the
detergent box in time.

Do  not  select  above   " 4 "  water  level  for laundries 
 less than 1.0kg ,so as to avoid splashing of water.

How to use the whitener

Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.

Avoid using whitener on laundries with color or 
pattern as they  are prone to lose color.

The whitener shall not touch the laundries directly.

Refer to the user's manual for the usage and 
quantity of the whitener.

For powder whitener, please dissolve it before use.

When you use softener, the softener must be lower
 than the underside of water cap.

Please often wash the detergent box, because 
softener may curdle easily.

Before use softener ,you must select disinfect 
program first.

How to use the softener

9

Summary of Contents for HWM60-78




















Reviews: