Haier HWM60-78, User Manual

The filter screen of the water inlet valve is likely to be 
blocked  by foreign materials and influence the water 
inlet.
Please clean it with brush every two months.

7Disposal after washing 

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence 
your using the machine.

Clean the detergent box and set it on
the control panel seat.
1.The method of dismantle:Push it up aslant and gently.
2.The method of install : install it upwards and aslant 
                                          and push it in .

Dismantle

Install

If the cabinet is dirty, wipe it with wet cloth
     Do not flush it directly with water.
     Wipe it with neutral detergent.
     Do not wipe it with thinner, petrol, alcohol etc.

1.After washing, close the water faucet.  ( If needed, you can dismantle the water inlet hose).

Thinner

Petrol

Alcohol

Please first pull off the power plug from the receptacle before cleaning.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (
about 1 hour), then close the top lid.

4.Hang up the power cord and drain hose.

3.Be sure to pull off the power plug before maintenance.

2.Do not store water in the washing machine for a long period.  Drain  the  water  completely after each using.

The lint filter must be used during washing.
It must be cleaned in time after each using.

Dismantle and install lint filter

Dismantle and install lint filter back cover

Filter cover

Lint filter

The back cover of lint filter

The front cover of lint filter

install

dismantle

The methods of dismantle and install lint filter as
follows:
1.Push down the spring piece of the top lint filter 
to make the claws out of the filter cover, and then
pull out the lint filter to get it down.
2.Pull the back of the lint filter, and then you can
get down it off the front cover of the lint filter.
3.Sweep the rubbish in the lint filter.
4.Put the back of the lint filter into the front cover .
5.Put the lint filter into filter cover, and make it tight
6.Make sure the lint filter is well installed, or it can 
influence your use.

15