background image

Do not decompose, repair or alter the
machine by yourself.

Do not put any hot or heavy items (such 
as  the  kettle  with  hot  water )  on  the 
washing machine.

Do  not  wash laundries  with volatile
materials (such as thinner, petrol etc.)

The  handicapped  or  children  without
 care shall not use the machine.

Keep the machine away from direct
sunlight and heat source like the heater.

Safety precautions

Do not stretch hands into the working 
machine.  It is dangerous even if  the 
rotation is slow. Take  special care of
the children.

Petrol

Thinne

r

  To protect your laundries and wash-
ing machine, please take out all of the
 coins, buttons, sand,  hairpin and 
other foreign materials before washing.

Please check if the water faucet is open,
and if the connection of the water inlet
pipe is proper.
It is suggested to use foamless washing
 powder.

   Please  keep the lint filter in good  condition, 
and install it  to proper position  during washing. 
If  the lint filter is lost or damaged, please 
contact the local after-sales service department
 of our company.

The back cover of lint filter

The front cover of lint filter

install

dismantle

3

Summary of Contents for HWM60-78




















Reviews: