5
1.
The height of the drain hose shall be less than
10cm, or the drainage will not be smooth, and
cost such long time that the machine may stop
at mid way.
2.
Do not trample or press the drain hose.
3.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
4.
If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not less
than 30mm, and the length shall not
exceed 1.5m.
If the extra hose is too long, cut it either
at A or at B point.
Usage of the drain hose
The drain hose shall drain smoothly
Remarks: in order to make sure of the correct of installation, it is suggested to change the
direction of the drain hose with our company serviceman .
1.Dismantle the back cover of the washing
machine.
3.Dismantle the protecting cover of the drain
outlet at the other side Install the bushing as
per indicated in Figure 2.
Drain outlet
protecting cover
Drain hose
bushing
Figure 1
Figure 3
2.Take off the drain hose frame. Put down
the drain hose , put the drain hose into the
cabinet. take off the drain hose bushing
(As indicated in Figure 1).
Drain hose
frame
Drain hose
bushing
Figure 2
Drain hose
frame
Drain outlet
protecting cover
Drain hose
Figure 4
How to change the direction of the drain hose
5.Install the protecting cover of the drain
outlet at the other side as per indicated in
Figure 4.
4.Extend the drain hose from the other side.
Fix the drain hose onto the base frame with
the drain hose frame.
(As indicated in Figure 3)
