Haier HWM65-1128NZP, User Manual

6

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.

1.

Open the top lid of the washing machine.

2.

Put the inner cover component on the outer tub cover, aiming the inner cover shaft to 
the installation hole of the corresponding outer tub cover shaft groove.

3.

Firstly insert the inner cover shaft of one side into the corresponding outer tub cover 
shaft groove, then push the another inner cover shaft into the corresponding outer 
tub cover shaft groove. Please install to designated position to guarantee there are 
no dropping or abnormal sound in opening and closing of the inner cover, and the 
operation shall be smooth. Do not dismount the inner cover component after washing.

After you open the package, please lean the washing machine gently down on soft items 
(like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the machine with the eight screws by a cross 
screwdriver, then lift the machine up gently. See to the figure:

Install the inner cover component

Install the bottom plate

Outer tub cover

Inner cover shaft

Inner cover shaft

Outer tub cover shaft groove

Outer tub cover shaft groove

Inner cover component

I enlarged view

II enlarged view

Figure 1

Figure 2

Bottom plate

Soft items

Front

Back

Two claws at the bottom 
cover shall be inserted in 
two bar-shaped holes in 
the stand. Make sure the 
claws are firmly in place.

Fasten the bottom plate 
to base frame with one 
screw.