background image

× ¢ Ò â Ê Â Ï î

2

Safety precautions

Please insert the power cord into 
special receptacle with rated vol-
tage.Be sure to use single-phase
 three pins  receptacle.The earthing
 terminal of the receptacle must be
 earthed reliably.If possible,please 
adopt electric leakage protector.

When the machine is normally
using, please put  the power plug
at the location easily to be insert-
ed and extracted by hand. Be sure
to pull the plug off when there's
power failure, or the machine is 
being moved, cleaned or when it 
is idle.

Do  not  put  the  machine  at  damp  
place like  the  bathroom .  Never  
wash  it   with water. Do not place 
wet laundries on the control panel.

Do not wash water-proof laundries like
the raincoat,  bike  covers etc. to avoid 
abnormal vibrations.

Do not let the machine share one receptacle
with  other electric  appliances. If  the  power
plug  is  damaged,  or  the  plugging  into the
receptacle  is loose, do not use the plug any
more.

Ventilation hole at 
the  bottom of the 
washing machine

Earth 

If the supply cord is damaged,it must be replaced 
by the manufacturer or its service 
agent or a similarly qualified person
 in order to avoid a hazard.

Do not use water hotter than 65 C .

For washing machine with ventilation 
openings in the base, that a carpet
 must not obstruct the openings.

Summary of Contents for HWM65VA

















Reviews: