background image

Ï ´

° × ¼ ± ¸

8

Preparation before washing

Confirm      if 
there's special
requirment for 
the laundries.

Clear the pocket.
Take   out   the 
coins ,  sand,
hairpins etc.

Fasten    the 
buttons   and 
zippers.

When the pulsator
is  running  ,   the
buttons   of    the
l a u n d r i e s   m a y
cause noise. For
t h e   s a k e   o f
discretion,please
put the laundries
with buttons  into
other laundries.

Preparation before washing
1.Connect the water inlet hose and open 
the water tap .
2.Confirm  that the washing machine is
earthed reliably .  Then insert the power
plug into the receptacle. Do not connect
the  earth  terminal  to  the gas pipe and 
tap water pipe.
3.Put down the drain hose. 

The  quantity  of
  the     laundries
shall  not exceed
the   rated value.
The big laundries
like   the    jeans
shall  be  put  in 
loosely.

Pay attention to followings before washing the laundries

a.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not waterabsorbing,please put them into water with hands.
d.For laundries with much soil,please remove the soil first.You can add detergent on the 
   part with serious soil directly.It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before
   putting them into the water.
f.Do not put the laundries polluted with chemicals directly into the washing machine.
g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries,
   please put them into mesh bag before wasing. 

9

The capacity of washing and spinning of the 
machine refer to the largest weight of the standard
laundries under dry condition  that can be washed
or spinned in one time. One time washing quantity 
shall be lower than the standard capacity.
The thickness, size, type of the cloth will influence 
the actual washing capacity. It is suitable for one 
time washing to put in reasonable amount of
laundries and the laundries can be turned round in 
washing.
Do not select "High" water level for laundries less 
than 1.0kg, so as to avoid splashing of water.
To wash thin laundries like the stocking, silk etc.,
please first put them into washing mesh bag (which 
can be purchased separately) before wash.

Put in the laundries

How to use the whitener

Fill water to decided level. Dilute
the whitener with container. Pour 
it slowly into the washing tub.
Avoid using whitener on 
laundries with color or pattern as 
they are prone to lose color.
The whitener shall not touch the 
laundries directly.
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please 
dissolve it before use.

Inlet box of the detergent

How to use the washing

powder

Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
3.Put in the laundries. Select
suitable water level.
The instant dissolving of the washing
powder:
1.Prepare warm water of 30

and a

container.
2.Add the powder while stirring to
fully dissolve it.
Put in the prorer quantities detergent
according to the water level and the 
laundries quantities .
It is suggested not to use high
sudsing detergent.
Washing powder with poor quality or 
long time storage maybe caked.
Please pay attention to cleaning the
detergent box in time

Usage of the detergent

Summary of Contents for HWM6802











Reviews: