background image

IMPORTANT  SAFETY  INSTRUCTIONS

Warning - To reduce the risk of fire, electric shock, or 
injury when using your appliance, follow basic 
precautions, including the following:

1. Read all instructions before using the appliance.

2

.

This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of 
experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for 
their safety. Children should be supervised to ensure that they do not 
play with the appliance.

3. Use this appliance only for its intended purpose as described in 
    this user and care guide.

4. Use only detergents or softeners recommended for use in this 
    appliance and keep them out of the reach of children.

5. This appliance must be properly installed in accordance with the 
    installation instructions before it is used.

6. Never unplug your appliance by pulling on the power cord. 
    Always grasp the plug firmly and pull straight out from the outlet.

7. Replace worn power cords, loose plugs and power outlets
    immediately.

8. Unplug your appliance before cleaning or before making any 
    repairs. Repairs should only be done by authorised technician.. 

9. Do not operate your appliance when parts are missing or broken.

10. Do not tamper with controls.

11. Do not operate your appliance in the presence of explosive 
      fumes or toxic flammable vapours.

o

12. Do not use hot water that exceeds 60 C in temperature. This 
    

 

refers to hot water entering the machine. If temperature 

      cannot be controlled, use WARM wash only.

2

Summary of Contents for HWM75TLA

















Reviews: