background image

As it is sensitive to ambient temperature. Refrigerator can not operate normally 
if it is installed in environments other than those described above. Start operation 
after the environment is improved. 

Ambient temperature: 18°C to 38°C (temperature of HXC-1308/1308B: 16 ~ 32°C), 18°C to 25°C 
are optimal and air conditioning system is used as necessary. 
Ambient humidity: below 85%Rh. 
Avoid excessive dust. 
Avoid mechanical swing or vibration. 
The refrigerator shall operate at an altitude Lower than 2000m. 
Input voltage: rated voltage ± 10%

.

 

It is prohibited to install the refrigerator outdoors. Electric leakage or shock may 
be caused if the refrigerator gets wet by rainwater. 

The installation site shall meet following requirements for normal operation and best performance of 
refrigerator: 

Do not install the refrigerator in a narrow and confined space and the door of the placement room 
may not be smaller or lower than that of the refrigerator, to ensure smooth entry and exit of the 
refrigerator as well as to prevent difficulty in maintenance and damage to the stored articles due 
to not timely repair of refrigerator as the installation site is not easy to be accessed. 
The ground at the installation site shall be solid and flat. 
It is well ventilated and free from direct sunshine.
Do not share one socket with plugs of other equipment and the plug shall be securely plugged 
into the socket.  
Do not twist or compress the power line. 
If the power line needs to be extended, the extended line shall be no smaller than 3mm² in 
sectional area and no longer than 3m. 
Check the operating voltage before operation and voltage regulator appropriate for motor load 
may be applied in regions with unstable voltage. Ensure the normal input voltage stands at 
220V±10% and the power of voltage regulator is greater than 4000W.  
The refrigerator shall be grounded in a reliable manner. 
If the socket is provided with grounding wire, check if it is well grounded before operation. 
If the socket is not provided with grounding wire, a new one shall be installed by engineering 
technician. 

Do not ground the refrigerator through gas pipes, water supply pipes, telephone 
lines or lightning conductors as electric shock may be caused. 
The power plug can be accessed after installation to ensure the power line can 
be pulled out in a timely manner in emergency cases. The air vent shall be free 
from barriers. 

38

7

Product Installation

Installation environment

Installation site

Specification

HXC-358B

5 Drawers

HXC-358

Blood Bank Refrigerator 

External dimensions (W X D X H) 

mm

 

Internal dimensions (W X D X H) 

mm

 

Effective volume 

Door 

Insulating materials 

Compressor 

Shelf / Drawer

Refrigeration mode 

Outer plate / inner plate 
Condenser / evaporator 

Refrigerant 

Headlamp 

Net weight 

Temperature of temperature 

measurement box 

Rated power supply 

Rated power / current 

Alarm system 

Rechargeable battery 

720x690x1730 

620x490x1160 

358L 

Electrical heating glass door 

Hard polyurethane foam (fluorine-free) 

Totally enclosed imported compressor 

Forced Wind Cooling Circulation 

Spraying steel plate / stainless steel plate 

Fin / fin 

Computer control system 

R134a 420g 

LED   3W

158kg

4

±1

220-240V~/50Hz/60Hz

460W/3.0A

High-low temperature alarm, sensor fault alarm, power failure 

alarm,  low battery alarm and door opening alarm 

DC 12 V rechargeable battery 

Name 
Model 

Duration time of power failure alarm

48 hours (when battery is fully charged) 

I

Temperature controller 

USB function / temperature recorder 

Standard / optional 

Y

Electric shock resistance type 

Power connect style

Climate Type

Foaming Agent

Noise Level

4

43dB(A)

CP/IP

Note: Climate Type 4 means the temperature is +30

,the relative humidity is 55%.Technical 

information may vary from the appliance that you have just purchased due to technical improvements.

The loading of each shelf

Max:25kg

5 shelves / 20 baskets 

Summary of Contents for HXC-158B

























Reviews: