background image

8

•This product should be responsible by an especially assigned person who regularly checks the 

operation and keeps record to ensure the normal operation of the Transport cooler.

•It is strictly prohibited to put too many relatively overheated items in the Transport cooler at one 

time, which will cause slow temperature drop.
•Inside the Transport cooler, do not use the electric appliance without production permission.

The transport cooler has a memory function for the set value. When the power restores after failure, 

the transport cooler will continue to operate according to the set parameters before the last power 

failure.

•Pull out the power plug when the Transport cooler will be out of service for a long time 

so as to prevent electric shock, leakage of electricity or fire due to aging of the power 

cord.

•If the Transport cooler is left unused for a long time in an unattended area, make sure 

that children will not approach the freezer and its door cannot be closed completely.

Operation after a power failure

Warning

9

Name of Parts ● Control panel

Display module 

of internal 

temperature

Internal 

component

Internal 

component

Display module

of internal

temperature

Box body 

module

Box body 

module

•HZY-8Z

•HZY-15Z

Name of Parts

Summary of Contents for HZY-15Z











Reviews: