General Controls
Most of the main functions of this system can be operated by the controls on the top panel of the
main unit, or by the buttons on the remote control. If a specific function can only be operated by
the remote control, or by the top panel controls, this will be clearly indicated in the instructions.
When operating this system with the remote control, make sure that the IR (Infrared) transmitter
on the front of the remote control is pointed at the remote sensor on the front panel of the main
unit.
The effective operating range of the remote control is approximately 20 feet. Please note that
bright sunlight or room lighting may interfere with the remote control operation. If the remote
control is not operating properly, try reducing the brightness of the room or moving closer to the
main unit. If this does not solve the problem, it may be time to change the remote control battery.
OPERATING INSTRUCTIONS
8
iPod/iPhone OPERATION
Choosing The Correct Adaptor
When connecting an iPod / iPhone to this iPod Dock, please ensure that the
correct adaptor plate is used. FAILURE TO DO SO MAY RESULT IN DAMAGE
TO THE iPod / iPhone.
The iPod dock comes with 4 removable dock adaptor. Using the correct adaptor ensures the
proper fit for your iPod / iPhone and help to reduce the stress on the connector when
operating the iPod / iPhone.
To place a dock adaptor:
1. Refer to the compatibility table on the next page and
select the correct dock adaptor for the iPod / iPhone.
2. Place the proper adaptor from your iPod / iPhone
accessories into the dock and press it into position.
The adaptor will only go in one way. The iPod dock
connector should fit through the opening in the bottom
of the adaptor.
3. Carefully align and then gently insert the iPod/iPhone
into the dock.(The iPod/iPhone must not be in a case
or “SKIN”)
4. To remove/replace a dock adaptor, first remove the
iPod/iPhone, then grip the adaptor and pull gently upwards.
iPhone 4
5G nano
4G
nano
iPod touch
iPhone
