10
c.
One side of the signal wire was connecting
d.
The socket of sensor wire is connecting
with the control panel, the other side was
connecting
with the display panel, please refer to
with the middle of the display panel. Take it
the signal wire to take it apart.
apart firstly, note that you should unplug it softly
in order to protect the plug.
e.
When changing the control panel, you should push
the button to pull out of the control panel. Do never
pull it wildly without pushing the button. That will break
it.
f.
The disply panel is fixed on the plastic panel with
three philip screws, you should regulate the philip screw
properly to make the button on the disply panel sensitive.
On the right side of the picture is fan switch, you can
connect it directly with the wire without thinking of the
direction, but remember to push the button on the wire
when you take it apart from the fan switch.
2.Connectting wires
a.
On the picture is the connection of the control
b.
On the left top of the back of the cabinet
and connect wire.
is box cover, take it apart you will find
the Cord stopper cover.
Summary of Contents for JC-298G
Page 16: ...15 System flow scenograph ...
Page 18: ...17 2 Connect diagram ...
Page 24: ...3 Trouble shooting 1 Compressor does t st art ...
Page 27: ......