Haier L26TA5A, Operating Instructions Manual

27

- HDMI   

. The HDMI logo and High-Definition Multimedia Interface is a trademark 

or registered trademark of HDMI Licensing.
-This TV can receive the High-Definition Multimedia Interface (HDMI).
-This TV supports HDCP (High-bandwidth Digital Contents Protection) Protocol for 
720x480p, 1280x720p and 1920x1080i resolution.
-When you connect this TV with a source device (DVD player, Set Top Box or PC) 
supporting Auto HDMI function, the output resolution of the source device will be
automatically set to 1280x720p.
-If the source device does not support Auto HDMI, you need to set the output 
resolution appropriately.
To get the best picture quality, adjust the DVD Player or Set Top Box’s output resolution 
to 1280x720p, and the PC graphics card’s output resolution to 1024x768, 60Hz.
-If the source device has an HDMI output, no other audio connection is necessary 
because HDMI-to-HDMI connecting includes both video and audio.

How To Connect

1. Connect the source device to HDMI port of this TV with an HDMI cable (not 
supplied with this product).
2. No separated audio connection is necessary.

How To Use

-If the source device supports Auto HDMI function, the output resolution of the source 
device will be automatically set to 1280x720p.
-If the source device does not support Auto HDMI, you need to set the output resolution 
appropriately.
To get the best picture quality, adjust the output resolution of the source device to 
1280x720p.
-Select HDMI input source by using TV/AV button.

How To Set

The method to set is similar to TV.

OTHER SETTING FUNCTION

TM

A NT .

VCR

AUD IO IN

L

R

S -V I DE O

 I N       

DVD

DVD

L

R

A U DIO IN

  Y   Cb/Pb  Cr/Pr

INPUT 

OUTPUT 

  AUDIO

（

L

/

MONO

）

AU DI O

（R）

S

-

VIDEO

VIDEO

SCART1

SCART2

You can connect outside signal source VCR,  VCD 
DVD, PC equipment to the TV set. 
Antenna Input
1.Connect the VCR radio frequency input to 
    the back radio frequency input of the LCD.
2. Connect the antenna to VCR antenna input.
3. Press TV/AV button to select TV mode.
4. Press PLAY button in VCR to start watching.

 S-VIDEO input 
If you use S terminal as signal input source, the
image quality will be better than video (AV).
1.Connect S terminal output in DVD to S terminal 
   input in TV set.
2.Connect S terminal left/right audio output in DVD to 
   the relevant port in TV set.
3.Press TV/AV button repeatedly until the display 
   mode is S-VIDEO.
4.Press PLAY button in DVD to broadcast. At this time
    the image programs in DVD will broadcast in TV set.

YPbPr input
1. Component terminal (Y/PbCb/PrCr) connect to the 
    component output of picture output device (such as 
    DVD, TUNER and so on ), the sound is input
    from AUDIO IN:
2.Press TV/AV button to select YPbPr mode.
3.Press PLAY button on the external device to start
   watching.

SCART input
1.Connect AUDIO OUT in the VCD/DVD to the 
    AUDIO/VIDEO port in the SCART commutator 
    in the accessory.
2.Connect the SCART commutator in the accessory
    to the SCART1 or SCART2 in the TV set.
3.When SCART commutator select INPUT, it enter
   video input status, when SCART commutator 
   select OUTPUT, it enter video output status.
4.Press TV/AV button to select SCART1 or SCART2
     mode.
5.Press PLAY button in VCD/DVD to start watching.
Note: please never use the S terminal in commutator.

HDMI input
1.Connect HDMI signal source output to the HDMI
   input in this TV set. 
2.Press TV/AV button to select HDMI mode.
3.Press PLAY button on the external device to start
   watching.

28

EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION

HDMI

DVD