Haier LE19K800, Owner'S Manual

CAUTION

: Don't let your machine display the same picture for a long time, please set up a screen protection 

   procedure. If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen. 

   Usually the 'leave shadow' will disappear gradually when you turn off the machine power. However, this trouble 

   can't be repaired, Which isn't in range of warranty.

Electrical release at turning off.

It is normal.

Noise Signals at turning off.

Remote control distance is 
short, lose control. 

1.Remove objects, avoiding cover the receive 
   window of remote control.
2.Change battery.

Computer display faintly.

1.Adjustment is incorrect.
2.Display mode is incorrect.

1.Use auto-adjustment function.
2.Use commend mode.

Computer display image 
excursion, not full screen, 
over screen.

1.Adjustment is incorrect.
2.Display mode is incorrect.

1.Use auto-adjustment function.
2.Enter "GEOMETRY" to adjust horizontal or 
   vertical position.
3.Use recommended mode.

Can not operate this 
machine. 

Exterior influence, for example 
lightning, static electricity and so 
on, which are possibly to disturb 
the normal operation of this 
machine.

Press "     " button to turn off electrical source, 
then press "     " button to turn on the TV again 
after 1-2 minutes.

1.Receive window of remote 
   continue was covered by
   objects.
2.The battery energy of remote 
   control is to low.

Symptom

Factor

Solution

Computer no display, and 
prompt no signal input, red
indicator LED twinkling.

Signal cable is loose or fall off.

Check signal cable whether or not loose, fall off,
reconnect  well again.

23