Android
10
Android
Net and Location setting
Select the desired network connection and set the parameters correctly.
Press button to select the main menu, and press / / / /OK button to select and enter the
settings. Press / button to choose from Net state, Wire setting, Wireless setting.
Net state: View current network connection status and detailed parameters.
Wire setting:
Wireless setting:
System can automatically search for usable
wireless access points, when WiFi is set ON,
press OK to enter into SSID, and press /
buttons to select the access point you want in
the list, press OK to connect.
If the access point with security certificate is
selected, the interface of password will be
shown after confirmation.
SSID: Display the name of wireless internet.
Password: Enter the security password of
wireless network, press “OK” button and
enter the password through soft keyboard
following the prompts.
Connection: Press / button and select
CONNECT, and the wireless network starts
connecting.
If connect to LAN cable line and support DHCP
(automatic setting), the IP setting value will be
automatically configured.
If want to set IP manually, please follow the steps
as below:
1. Press OK button to select “automatic
acquisition IP address” (close).
2. Press / / / buttons to select the figure to be
changed, then press numeric buttons to enter
the related parameters of IP address, subnet
mask, default gateway and DNS server.
3. Press button to select SAVE, then press
OK to complete the setting of IP.
