Haier LE55H330, Owner'S Manual

Basic Receiving and Playing Operations

22  LED -LCD  television  Owner’s Manual 

Press 

B

/

 to select the “Confirm” option, you will 

enter the interface for selecting a corresponding 3D 

mode. (See Fig. 2 below)

If the TV is currently in the 3D 

mode:

Press the 3D switch key on the remote control to call 

A

out the prompt menu. (See Fig. 3 below) 

Press 

B

/

keys to exit the 3D mode or cancel the 

exit.

 Note

When you watch a 3D TV program, please wear 

❏

and turn on 3D glasses.

If the signal currently detected in the HDMI 

❏

channel is one of 3D signals specified in the 
Specification HDMI1.4a, selecting the “Confirm” 
option will make the TV directly switch to a 
corresponding 3D mode, so the above Fig. 2 will 
not appear and you needn’t choose a 3D mode.

In the 3D mode, the TV screen display menu can 

❏

still be called out and displayed normally.

The TV doesn’t memorize the setting of 3D mode, 

❏

so it will be in the 2D mode when you turn it on 
again after turning it off.

In the USB mode, there are various modes of 3D 

❏

video sources. With USB signals, the 3D switch key 
functions only when playing a video (film). The TV 
will exit the 3D mode when playing ends or when 

you manually exit the 3D mode.

Advanced function

Streaming Media Playing 

System

 Note

The diagrams in the following section are 

❏

schematic and only for your reference. Please see 
the actual product if necessary.

Supported file formats:

A

Picture: 

•

*. JPEG; PNG; BMP;

Music: 

•

*. Mp3(8-320kbps; WMA(32-192kbps); 

AAC(16-576kbps)
Movie:

•

MPEG4: *. avi files in accordance with Div*4. x/5. x 

Protocol; 

MPEG2: some *. mpeg files; 
MPEG1: *. dat and some *. mpeg files;
RealVideo
Text: 

•

*. Txt.

 Note

Due to the particularity of file coding, some files 

❏

may be unable to be read.

Supported equipment:    

B

Support the equipment that supports Mass Storage 

Protocol and whose file system is FAT/NTFS/FAT16/

FAT32, such as some USB disks, mobile hard disks, 

card readers, MP3 players and digital cameras. 

If USB equipment could not be identified due 

to unsupported file system, please format the 

equipment to the above-mentioned file system;

The external card reader supports most of the digital 

C

cards in the current market; the types of digital cards 
that can be read are relevant to the performance 
of selected card reader; you may attach standard 
mobile hard disks (working voltage 5.0V, working 
current not higher than 500mA); during media 
playing, do not pull out storage media, otherwise it 
may cause system halt, damage the files in storage 
media or damage USB equipment; sometimes, the 
TV may halt due to overhigh information error rate, 
in which case you should restart the system; there 
are a lot of nonstandard USB mobile equipment 
in the market, they may not be identified when 
connected to the streaming media playing system; 
the above phenomena may also occur on computers 
and are not the TV’s fault.

To achieve smooth playing, ensure the following:

D