Haier LET19T3CW, Instruction Manual

Digital LED LCD Television Instruction Manual                                                                                                                                                                 P.09                                                                                                                 

03 Getting Started

Prepartion of your 

remote control

Battery installation

Place the remote control face down, then open the 

A 

cover of the battery compartment.        

Install two AAA batteries. (The + and - symbol of 

B 

the battery must match with the marks on the 
remote).   

Close the cover of the battery compartment.

C 

Battery caution

Confirm there is no object between the remote control 

and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the 

signal sent by the remote control. In this situation turn 

the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a 

damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery 

types. Install the batteries at the correct polarities. 

Do not use rechargeable batteries. If your TV is to be 

stored for a period of time, remove the batteries from 

the remote control.

03 

GettingStarted

Setting up

Location

You will need to place your TV near your plug socket (so the 

power cable can comfortably reach) and within reach of your 

aerial socket or extension lead.

Connection

Insert your TV aerial lead into the Antenna input at the 

A 

side of the TV.

Insert the batteries into the remote control. Make sure 

B 

they are inserted the right way around, matching the 
polarity as indicated inside the battery compartment.

Switching your TV on

Press the 

A 

POWER 

button on the right side of the TV 

once. A red flashing light will appear in the corner of the 
screen.

Press 

B 

POWER 

on the remote control. The TV will turn 

on and the red light will turn blue. This may take a few 
moments.

Select your chosen language when prompted from the 

C 

list that will appear on screen. Use the

34

 button to 

scroll to the language you want and press 

OK

 button to 

confirm.

TUNING YOUR TV

Switching to an external source other 

that TV

If you have attached a DVD player or similar external device 

to the TV, you will need to tell the TV to display the content 

from it. Simply press 

SOURCE

 which will bring up the source