background image

 P.14                                                                                                                                                             Digital LED LCD Television Instruction Manual

the remote control.

4:3 mode

 

Choose 

4:3 

when you want to view a picture 

with an original 4:3 aspect ratio, with gray bars 

appearing at both the left and right sides. 

16:9 mode

 

Choose 

16:9 

when you want to adjust the picture 

horizontally, in a linear proportion to fill the entire 
screen.

Wide

 

Choose Wide when you want to adjust the picture 

in a non-linear proportion, that is, more enlarged 

at top sides and no alteration at bottom side.

Zoom1

 

Choose 

Zoom1 

when you want to view the picture 

without any alteration. However, the top and 

bottom portions of the picture will be cropped. 

Zoom2

 

Choose 

Zoom2 

when you want the picture to be 

altered, both vertically extended and cropped. 

The picture taking a halfway trade off between 

alteration and screen coverage. 

Blue Screen

 

This will select the character background colour.

 Note

The Blue Screen function is only available for 

 

ATV mode.

OSD Time Out

 

To set how long you want the menus to appear  

on-screen. Each press of 

34

 button repeatedly to 

select the number of preset minutes, the Time will 

be set in sequence: 5secs, 10secs, 15secs, 20secs, 

25secs,30secs.

Sleep

 

To set how long you want to turn off the TV after a 

preset time (from 5 to 240 minutes).

Lock

 

To control the turner , program,source volume and so 

on , please refer to the page 15 for detail.

Reset

 

To recover to the default value.

HDMI  Scan Info     

 

To set the HDMI  Scan Info as oversacn or underscan.

 Note

The HDMI Overscan function is only available 

 

for HDMI mode.

Channel management 

Press 

MENU

 button.

Press 

5 

button to select 

Tuning 

menu, press 

4

 button to enter.

Press 

5 

button to select the Channel 

management  item  , and press 

4

 to enter.

When you are satisfied with your choice, press the

 

EXIT

 button to return to normal viewing or press 

MENU

 button to return to the previous menu.

Channel Edit        

 

 

 

 

 

 

 

 

 

Press 

4

 button to enter the Channel Edit item,then 

press  

5

 button to choose the channel you want to 

edit.You can press red,green,yellow or blue button to 
set the option you need. 
 
 

  Menu

Tuning

Select

  Exit

MENU

Channel Management
Country              United Kingdom
Auto Search
Manual Search
Time
Option
Version        1.6.0826

DTV Channel  Manager

Channel Edit
Channel Sorting
Channel Grouping
Delete All Channels

S.NO

Channel name

Fav/

Del/

Skip/ Lock

0005

five

0015

Ch15

0016

QVC

0017

UK Gold

0023

bid-up.tv

0025

TCM

Channel

United Kingdom/618000KHz/8M

Fav

Del

Skip

Lock

  United Kingdom/514000KHZ/8M

Edit

Summary of Contents for LET19T3CW


























Reviews: